IDocument (Eclipse 3.5.2 Javadoc and Source)

All Known Implementing Classes:

AbstractDocument, ChildDocument, ConsoleDocument, Document, DocumentAdapter, DocumentClone, EditDocument, ProjectionDocument, SimpleDocument, SynchronizableDocument
```
public interface IDocument
```
An IDocument represents text providing support for
- text manipulation
- positions
- partitions
- line information
- document change listeners
- document partition change listeners
A document allows to set its content and to manipulate it. For manipulation a document provides the replace method which substitutes a given string for a specified text range in the document. On each document change, all registered document listeners are informed exactly once.
Positions are stickers to the document's text that are updated when the document is changed. Positions are updated by IPositionUpdaters. Position updaters are managed as a list. The list defines the sequence in which position updaters are invoked. This way, position updaters may rely on each other. Positions are grouped into categories. A category is a ordered list of positions. the document defines the order of position in a category based on the position's offset based on the implementation of the method computeIndexInCategory. Each document must support a default position category whose name is specified by this interface.

A document can be considered consisting of a sequence of not overlapping partitions. A partition is defined by its offset, its length, and its type. Partitions are updated on every document manipulation and ensured to be up-to-date when the document listeners are informed. A document uses an IDocumentPartitioner to manage its partitions. A document may be unpartitioned which happens when there is no partitioner. In this case, the document is considered as one single partition of a default type. The default type is specified by this interface. If a document change changes the document's partitioning all registered partitioning listeners are informed exactly once. The extension interface IDocumentExtension3 introduced in version 3.0 extends the concept of partitions and allows a document to not only manage one but multiple partitioning. Each partitioning has an id which must be used to refer to a particular partitioning.

An IDocument provides methods to map line numbers and character positions onto each other based on the document's line delimiters. When moving text between documents using different line delimiters, the text must be converted to use the target document's line delimiters.

An IDocument does not care about mixed line delimiters. Clients who want to ensure a single line delimiter in their document should use the line delimiter returned by TextUtilities.getDefaultLineDelimiter(IDocument).

IDocument throws BadLocationException if the parameters of queries or manipulation requests are not inside the bounds of the document. The purpose of this style of exception handling is
- prepare document for multi-thread access
- allow clients to implement backtracking recovery methods
- prevent clients from up-front contract checking when dealing with documents.
A document support for searching has deprecated since version 3.0. The recommended way for searching is to use a FindReplaceDocumentAdapter.

In order to provide backward compatibility for clients of IDocument, extension interfaces are used to provide a means of evolution. The following extension interfaces exist:
- IDocumentExtension since version 2.0 introducing the concept of post notification replaces in order to allow document listeners to manipulate the document while receiving a document change notification
- IDocumentExtension2 since version 2.1 introducing configuration methods for post notification replaces and document change notification.
- IDocumentExtension3 since version 3.0 replacing the original partitioning concept by allowing multiple partitionings at the same time and introducing zero- length partitions in conjunction with the distinction between open and closed partitions.
- IDocumentExtension4 since version 3.1 introducing the concept of rewrite sessions. A rewrite session is a sequence of document replace operations that form a semantic unit. It also introduces a modification stamp and the ability to set the initial line delimiter and to query the default line delimiter.
Clients may implement this interface and its extension interfaces or use the default implementation provided by AbstractDocument and Document.
See Also:
IDocumentExtension, IDocumentExtension2, IDocumentExtension3, IDocumentExtension4, Position, IPositionUpdater, IDocumentPartitioner, ILineTracker, IDocumentListener, IDocumentPartitioningListener

Field Summary

Fields
Modifier and Type	Field and Description
`static String`	`DEFAULT_CATEGORY` The identifier of the default position category.
`static String`	`DEFAULT_CONTENT_TYPE` The identifier of the default partition content type.

Method Summary

Methods
Modifier and Type	Method and Description
`void`	`addDocumentListener(IDocumentListener listener)` Registers the document listener with the document.
`void`	`addDocumentPartitioningListener(IDocumentPartitioningListener listener)` Registers the document partitioning listener with the document.
`void`	`addPosition(Position position)` Adds the position to the document's default position category.
`void`	`addPosition(String category, Position position)` Adds the position to the specified position category of the document.
`void`	`addPositionCategory(String category)` Adds a new position category to the document.
`void`	`addPositionUpdater(IPositionUpdater updater)` Appends a new position updater to the document's list of position updaters.
`void`	`addPrenotifiedDocumentListener(IDocumentListener documentAdapter)` Adds the given document listener as one which is notified before those document listeners added with `addDocumentListener` are notified.
`int`	`computeIndexInCategory(String category, int offset)` Computes the index at which a `Position` with the specified offset would be inserted into the given category.
`int`	`computeNumberOfLines(String text)` Computes the number of lines in the given text.
`ITypedRegion[]`	`computePartitioning(int offset, int length)` Computes the partitioning of the given document range using the document's partitioner.
`boolean`	`containsPosition(String category, int offset, int length)` Determines whether a position described by the parameters is managed by this document.
`boolean`	`containsPositionCategory(String category)` Checks the presence of the specified position category.
`String`	`get()` Returns this document's complete text.
`String`	`get(int offset, int length)` Returns this document's text for the specified range.
`char`	`getChar(int offset)` Returns the character at the given document offset in this document.
`String`	`getContentType(int offset)` Returns the type of the document partition containing the given offset.
`IDocumentPartitioner`	`getDocumentPartitioner()` Returns this document's partitioner.
`String[]`	`getLegalContentTypes()` Returns the set of legal content types of document partitions.
`String[]`	`getLegalLineDelimiters()` Returns the document's legal line delimiters.
`int`	`getLength()` Returns the number of characters in this document.
`String`	`getLineDelimiter(int line)` Returns the line delimiter of that line or `null` if the line is not closed with a line delimiter.
`IRegion`	`getLineInformation(int line)` Returns a description of the specified line.
`IRegion`	`getLineInformationOfOffset(int offset)` Returns a description of the line at the given offset.
`int`	`getLineLength(int line)` Returns the length of the given line including the line's delimiter.
`int`	`getLineOffset(int line)` Determines the offset of the first character of the given line.
`int`	`getLineOfOffset(int offset)` Returns the number of the line at which the character of the specified position is located.
`int`	`getNumberOfLines()` Returns the number of lines in this document
`int`	`getNumberOfLines(int offset, int length)` Returns the number of lines which are occupied by a given text range.
`ITypedRegion`	`getPartition(int offset)` Returns the document partition in which the position is located.
`String[]`	`getPositionCategories()` Returns all position categories of this document.
`Position[]`	`getPositions(String category)` Returns all positions of the given position category.
`IPositionUpdater[]`	`getPositionUpdaters()` Returns the list of position updaters attached to the document.
`void`	`insertPositionUpdater(IPositionUpdater updater, int index)` Inserts the position updater at the specified index in the document's list of position updaters.
`void`	`removeDocumentListener(IDocumentListener listener)` Removes the listener from the document's list of document listeners.
`void`	`removeDocumentPartitioningListener(IDocumentPartitioningListener listener)` Removes the listener from this document's list of document partitioning listeners.
`void`	`removePosition(Position position)` Removes the given position from the document's default position category.
`void`	`removePosition(String category, Position position)` Removes the given position from the specified position category.
`void`	`removePositionCategory(String category)` Deletes the position category from the document.
`void`	`removePositionUpdater(IPositionUpdater updater)` Removes the position updater from the document's list of position updaters.
`void`	`removePrenotifiedDocumentListener(IDocumentListener documentAdapter)` Removes the given document listener from the document's list of pre-notified document listeners.
`void`	`replace(int offset, int length, String text)` Substitutes the given text for the specified document range.
`int`	`search(int startOffset, String findString, boolean forwardSearch, boolean caseSensitive, boolean wholeWord)` Deprecated. as of 3.0 search is provided by `FindReplaceDocumentAdapter`
`void`	`set(String text)` Replaces the content of the document with the given text.
`void`	`setDocumentPartitioner(IDocumentPartitioner partitioner)` Sets this document's partitioner.

- Field Detail
  - DEFAULT_CATEGORY
```
static final String DEFAULT_CATEGORY
```
    The identifier of the default position category.
    
    See Also:
    Constant Field Values
  - DEFAULT_CONTENT_TYPE
```
static final String DEFAULT_CONTENT_TYPE
```
    The identifier of the default partition content type.
    
    See Also:
    Constant Field Values
- Method Detail
  - getChar
```
char getChar(int offset)
             throws BadLocationException
```
    Returns the character at the given document offset in this document.
    
    Parameters:
    offset - a document offset
    
    Returns:
    the character at the offset
    
    Throws:
    
    BadLocationException - if the offset is invalid in this document
  - getLength
```
int getLength()
```
    Returns the number of characters in this document.
    
    Returns:
    the number of characters in this document
  - get
```
String get()
```
    Returns this document's complete text.
    
    Returns:
    the document's complete text
  - get
```
String get(int offset,
         int length)
           throws BadLocationException
```
    Returns this document's text for the specified range.
    
    Parameters:
    offset - the document offset
    length - the length of the specified range
    
    Returns:
    the document's text for the specified range
    
    Throws:
    
    BadLocationException - if the range is invalid in this document
  - set
```
void set(String text)
```
    Replaces the content of the document with the given text. Sends a DocumentEvent to all registered IDocumentListener. This method is a convenience method for replace(0, getLength(), text).
    
    Parameters:
    text - the new content of the document
    See Also:
    DocumentEvent, IDocumentListener
  - replace
```
void replace(int offset,
           int length,
           String text)
             throws BadLocationException
```
    Substitutes the given text for the specified document range. Sends a DocumentEvent to all registered IDocumentListener.
    
    Parameters:
    offset - the document offset
    length - the length of the specified range
    text - the substitution text
    
    Throws:
    
    BadLocationException - if the offset is invalid in this document
    See Also:
    DocumentEvent, IDocumentListener
  - addDocumentListener
```
void addDocumentListener(IDocumentListener listener)
```
    Registers the document listener with the document. After registration the IDocumentListener is informed about each change of this document. If the listener is already registered nothing happens.
    An IDocumentListener may call back to this method when being inside a document notification.
    
    Parameters:
    listener - the listener to be registered
  - removeDocumentListener
```
void removeDocumentListener(IDocumentListener listener)
```
    Removes the listener from the document's list of document listeners. If the listener is not registered with the document nothing happens.
    An IDocumentListener may call back to this method when being inside a document notification.
    
    Parameters:
    listener - the listener to be removed
  - addPrenotifiedDocumentListener
```
void addPrenotifiedDocumentListener(IDocumentListener documentAdapter)
```
    Adds the given document listener as one which is notified before those document listeners added with addDocumentListener are notified. If the given listener is also registered using addDocumentListener it will be notified twice. If the listener is already registered nothing happens.
    This method is not for public use.
    
    Parameters:
    documentAdapter - the listener to be added as pre-notified document listener
    See Also:
    removePrenotifiedDocumentListener(IDocumentListener)
  - removePrenotifiedDocumentListener
```
void removePrenotifiedDocumentListener(IDocumentListener documentAdapter)
```
    Removes the given document listener from the document's list of pre-notified document listeners. If the listener is not registered with the document nothing happens.
    This method is not for public use.
    
    Parameters:
    documentAdapter - the listener to be removed
    See Also:
    addPrenotifiedDocumentListener(IDocumentListener)
  - addPositionCategory
```
void addPositionCategory(String category)
```
    Adds a new position category to the document. If the position category already exists nothing happens.
    
    Parameters:
    category - the category to be added
  - removePositionCategory
```
void removePositionCategory(String category)
                            throws BadPositionCategoryException
```
    Deletes the position category from the document. All positions in this category are thus deleted as well.
    
    Parameters:
    category - the category to be removed
    
    Throws:
    
    BadPositionCategoryException - if category is undefined in this document
  - getPositionCategories
```
String[] getPositionCategories()
```
    Returns all position categories of this document. This includes the default position category.
    
    Returns:
    the document's position categories
  - containsPositionCategory
```
boolean containsPositionCategory(String category)
```
    Checks the presence of the specified position category.
    
    Parameters:
    category - the category to check
    
    Returns:
    true if category is defined
  - addPosition
```
void addPosition(Position position)
                 throws BadLocationException
```
    Adds the position to the document's default position category. This is a convenience method for addPosition(DEFAULT_CATEGORY, position).
    
    Parameters:
    position - the position to be added
    
    Throws:
    
    BadLocationException - if position describes an invalid range in this document
  - removePosition
```
void removePosition(Position position)
```
    Removes the given position from the document's default position category. This is a convenience method for removePosition(DEFAULT_CATEGORY, position).
    
    Parameters:
    position - the position to be removed
  - addPosition
```
void addPosition(String category,
               Position position)
                 throws BadLocationException,
                        BadPositionCategoryException
```
    Adds the position to the specified position category of the document. Positions may be added multiple times. The order of the category is maintained.
    Note: The position is only updated on each change applied to the document if a IPositionUpdater has been registered that handles the given category.
    
    Parameters:
    category - the category to which to add
    position - the position to be added
    
    Throws:
    
    BadLocationException - if position describes an invalid range in this document
    
    BadPositionCategoryException - if the category is undefined in this document
  - removePosition
```
void removePosition(String category,
                  Position position)
                    throws BadPositionCategoryException
```
    Removes the given position from the specified position category. If the position is not part of the specified category nothing happens. If the position has been added multiple times, only the first occurrence is deleted.
    
    Parameters:
    category - the category from which to delete
    position - the position to be deleted
    
    Throws:
    
    BadPositionCategoryException - if category is undefined in this document
  - getPositions
```
Position[] getPositions(String category)
                        throws BadPositionCategoryException
```
    Returns all positions of the given position category. The positions are ordered according to the category's order. Manipulating this list does not affect the document, but manipulating the position does affect the document.
    
    Parameters:
    category - the category
    
    Returns:
    the list of all positions
    
    Throws:
    
    BadPositionCategoryException - if category is undefined in this document
  - containsPosition
```
boolean containsPosition(String category,
                       int offset,
                       int length)
```
    Determines whether a position described by the parameters is managed by this document.
    
    Parameters:
    category - the category to check
    offset - the offset of the position to find
    length - the length of the position to find
    
    Returns:
    true if position is found
  - computeIndexInCategory
```
int computeIndexInCategory(String category,
                         int offset)
                           throws BadLocationException,
                                  BadPositionCategoryException
```
    Computes the index at which a Position with the specified offset would be inserted into the given category. As the ordering inside a category only depends on the offset, the index must be chosen to be the first of all positions with the same offset.
    
    Parameters:
    category - the category in which would be added
    offset - the position offset to be considered
    
    Returns:
    the index into the category
    
    Throws:
    
    BadLocationException - if offset is invalid in this document
    
    BadPositionCategoryException - if category is undefined in this document
  - addPositionUpdater
```
void addPositionUpdater(IPositionUpdater updater)
```
    Appends a new position updater to the document's list of position updaters. Position updaters may be added multiple times.
    An IPositionUpdater may call back to this method when being inside a document notification.
    
    Parameters:
    updater - the updater to be added
  - removePositionUpdater
```
void removePositionUpdater(IPositionUpdater updater)
```
    Removes the position updater from the document's list of position updaters. If the position updater has multiple occurrences only the first occurrence is removed. If the position updater is not registered with this document, nothing happens.
    An IPositionUpdater may call back to this method when being inside a document notification.
    
    Parameters:
    updater - the updater to be removed
  - insertPositionUpdater
```
void insertPositionUpdater(IPositionUpdater updater,
                         int index)
```
    Inserts the position updater at the specified index in the document's list of position updaters. Positions updaters may be inserted multiple times.
    An IPositionUpdater may call back to this method when being inside a document notification.
    
    Parameters:
    updater - the updater to be inserted
    index - the index in the document's updater list
  - getPositionUpdaters
```
IPositionUpdater[] getPositionUpdaters()
```
    Returns the list of position updaters attached to the document.
    
    Returns:
    the list of position updaters
  - getLegalContentTypes
```
String[] getLegalContentTypes()
```
    Returns the set of legal content types of document partitions. This set can be empty. The set can contain more content types than contained by the result of getPartitioning(0, getLength()).
    Use IDocumentExtension3.getLegalContentTypes(String) when the document supports multiple partitionings. In that case this method is equivalent to:
```
    IDocumentExtension3 extension= (IDocumentExtension3) document;
    return extension.getLegalContentTypes(IDocumentExtension3.DEFAULT_PARTITIONING);
 
```
    Returns:
    the set of legal content types
  - getContentType
```
String getContentType(int offset)
                      throws BadLocationException
```
    Returns the type of the document partition containing the given offset. This is a convenience method for getPartition(offset).getType().
    Use IDocumentExtension3.getContentType(String, int, boolean) when the document supports multiple partitionings. In that case this method is equivalent to:
```
    IDocumentExtension3 extension= (IDocumentExtension3) document;
    return extension.getContentType(IDocumentExtension3.DEFAULT_PARTITIONING, offset, false);
 
```
    Parameters:
    offset - the document offset
    
    Returns:
    the partition type
    
    Throws:
    
    BadLocationException - if offset is invalid in this document
  - getPartition
```
ITypedRegion getPartition(int offset)
                          throws BadLocationException
```
    Returns the document partition in which the position is located.
    Use IDocumentExtension3.getPartition(String, int, boolean) when the document supports multiple partitionings. In that case this method is equivalent:
```
    IDocumentExtension3 extension= (IDocumentExtension3) document;
    return extension.getPartition(IDocumentExtension3.DEFAULT_PARTITIONING, offset, false);
 
```
    Parameters:
    offset - the document offset
    
    Returns:
    a specification of the partition
    
    Throws:
    
    BadLocationException - if offset is invalid in this document
  - computePartitioning
```
ITypedRegion[] computePartitioning(int offset,
                                 int length)
                                   throws BadLocationException
```
    Computes the partitioning of the given document range using the document's partitioner.
    Use IDocumentExtension3.computePartitioning(String, int, int, boolean) when the document supports multiple partitionings. In that case this method is equivalent:
```
    IDocumentExtension3 extension= (IDocumentExtension3) document;
    return extension.computePartitioning(IDocumentExtension3.DEFAULT_PARTITIONING, offset, length, false);
 
```
    Parameters:
    offset - the document offset at which the range starts
    length - the length of the document range
    
    Returns:
    a specification of the range's partitioning
    
    Throws:
    
    BadLocationException - if the range is invalid in this document
  - addDocumentPartitioningListener
```
void addDocumentPartitioningListener(IDocumentPartitioningListener listener)
```
    Registers the document partitioning listener with the document. After registration the document partitioning listener is informed about each partition change cause by a document manipulation or by changing the document's partitioner. If a document partitioning listener is also a document listener, the following notification sequence is guaranteed if a document manipulation changes the document partitioning:
    - listener.documentAboutToBeChanged(DocumentEvent);
    - listener.documentPartitioningChanged();
    - listener.documentChanged(DocumentEvent);
    If the listener is already registered nothing happens.
    An IDocumentPartitioningListener may call back to this method when being inside a document notification.
    Parameters:
    listener - the listener to be added
  - removeDocumentPartitioningListener
```
void removeDocumentPartitioningListener(IDocumentPartitioningListener listener)
```
    Removes the listener from this document's list of document partitioning listeners. If the listener is not registered with the document nothing happens.
    An IDocumentPartitioningListener may call back to this method when being inside a document notification.
    
    Parameters:
    listener - the listener to be removed
  - setDocumentPartitioner
```
void setDocumentPartitioner(IDocumentPartitioner partitioner)
```
    Sets this document's partitioner. The caller of this method is responsible for disconnecting the document's old partitioner from the document and to connect the new partitioner to the document. Informs all document partitioning listeners about this change.
    Use IDocumentExtension3.setDocumentPartitioner(String, IDocumentPartitioner) when the document supports multiple partitionings. In that case this method is equivalent to:
```
    IDocumentExtension3 extension= (IDocumentExtension3) document;
    extension.setDocumentPartitioner(IDocumentExtension3.DEFAULT_PARTITIONING, partitioner);
 
```
    Parameters:
    partitioner - the document's new partitioner
    See Also:
    IDocumentPartitioningListener
  - getDocumentPartitioner
```
IDocumentPartitioner getDocumentPartitioner()
```
    Returns this document's partitioner.
    Use IDocumentExtension3.getDocumentPartitioner(String) when the document supports multiple partitionings. In that case this method is equivalent to:
```
    IDocumentExtension3 extension= (IDocumentExtension3) document;
    return extension.getDocumentPartitioner(IDocumentExtension3.DEFAULT_PARTITIONING);
 
```
    Returns:
    this document's partitioner
  - getLineLength
```
int getLineLength(int line)
                  throws BadLocationException
```
    Returns the length of the given line including the line's delimiter.
    
    Parameters:
    line - the line of interest
    
    Returns:
    the length of the line
    
    Throws:
    
    BadLocationException - if the line number is invalid in this document
  - getLineOfOffset
```
int getLineOfOffset(int offset)
                    throws BadLocationException
```
    Returns the number of the line at which the character of the specified position is located. The first line has the line number 0. A new line starts directly after a line delimiter. (offset == document length) is a valid argument although there is no corresponding character.
    
    Parameters:
    offset - the document offset
    
    Returns:
    the number of the line
    
    Throws:
    
    BadLocationException - if the offset is invalid in this document
  - getLineOffset
```
int getLineOffset(int line)
                  throws BadLocationException
```
    Determines the offset of the first character of the given line.
    
    Parameters:
    line - the line of interest
    
    Returns:
    the document offset
    
    Throws:
    
    BadLocationException - if the line number is invalid in this document
  - getLineInformation
```
IRegion getLineInformation(int line)
                           throws BadLocationException
```
    Returns a description of the specified line. The line is described by its offset and its length excluding the line's delimiter.
    
    Parameters:
    line - the line of interest
    
    Returns:
    a line description
    
    Throws:
    
    BadLocationException - if the line number is invalid in this document
  - getLineInformationOfOffset
```
IRegion getLineInformationOfOffset(int offset)
                                   throws BadLocationException
```
    Returns a description of the line at the given offset. The description contains the offset and the length of the line excluding the line's delimiter.
    
    Parameters:
    offset - the offset whose line should be described
    
    Returns:
    a region describing the line
    
    Throws:
    
    BadLocationException - if offset is invalid in this document
  - getNumberOfLines
```
int getNumberOfLines()
```
    Returns the number of lines in this document
    
    Returns:
    the number of lines in this document
  - getNumberOfLines
```
int getNumberOfLines(int offset,
                   int length)
                     throws BadLocationException
```
    Returns the number of lines which are occupied by a given text range.
    
    Parameters:
    offset - the offset of the specified text range
    length - the length of the specified text range
    
    Returns:
    the number of lines occupied by the specified range
    
    Throws:
    
    BadLocationException - if specified range is invalid in this tracker
  - computeNumberOfLines
```
int computeNumberOfLines(String text)
```
    Computes the number of lines in the given text. For a given implementer of this interface this method returns the same result as set(text); getNumberOfLines().
    
    Parameters:
    text - the text whose number of lines should be computed
    
    Returns:
    the number of lines in the given text
  - getLegalLineDelimiters
```
String[] getLegalLineDelimiters()
```
    Returns the document's legal line delimiters.
    
    Returns:
    the document's legal line delimiters
  - getLineDelimiter
```
String getLineDelimiter(int line)
                        throws BadLocationException
```
    Returns the line delimiter of that line or null if the line is not closed with a line delimiter.
    
    Parameters:
    line - the line of interest
    
    Returns:
    the line's delimiter or null if line does not have a delimiter
    
    Throws:
    
    BadLocationException - if the line number is invalid in this document
  - search
```
int search(int startOffset,
         String findString,
         boolean forwardSearch,
         boolean caseSensitive,
         boolean wholeWord)
           throws BadLocationException
```
    Deprecated. as of 3.0 search is provided by FindReplaceDocumentAdapter
    
    Returns the offset of a given search string in the document based on a set of search criteria.
    
    Parameters:
    startOffset - document offset at which search starts
    findString - the string to find
    forwardSearch - the search direction
    caseSensitive - indicates whether lower and upper case should be distinguished
    wholeWord - indicates whether the findString should be limited by white spaces as defined by Character.isWhiteSpace
    
    Returns:
    the offset of the first occurrence of findString based on the parameters or -1 if no match is found
    
    Throws:
    
    BadLocationException - if startOffset is an invalid document offset

Interface IDocument [ source ]

Field Summary

Method Summary

Field Detail

DEFAULT_CATEGORY

DEFAULT_CONTENT_TYPE

Method Detail

getChar

getLength

get

get

set

replace

addDocumentListener

removeDocumentListener

addPrenotifiedDocumentListener

removePrenotifiedDocumentListener

addPositionCategory

removePositionCategory

getPositionCategories

containsPositionCategory

addPosition

removePosition

addPosition

removePosition

getPositions

containsPosition

computeIndexInCategory

addPositionUpdater

removePositionUpdater

insertPositionUpdater

getPositionUpdaters

getLegalContentTypes

getContentType

getPartition

computePartitioning

addDocumentPartitioningListener

removeDocumentPartitioningListener

setDocumentPartitioner

getDocumentPartitioner

getLineLength

getLineOfOffset

getLineOffset

getLineInformation

getLineInformationOfOffset

getNumberOfLines

getNumberOfLines

computeNumberOfLines

getLegalLineDelimiters

getLineDelimiter

search